百乐彩手机版app下载-百乐彩娱乐官网下载

Home >  Product & Service >  Products >  Charging Equipment

  • SZCD-Z□ DC Charging Station Module
Charging Equipment

SZCD-Z□ DC Charging Station Module

SZCD-Z□ DC charging station module adopts advanced rectifying technology and soft switching techn...

  • Product Introduction
  • Product Features
  • Technical Parameters

Product Introduction

SZCD-Z□ DC charging station module adopts advanced rectifying technology and soft switching technology, making the module more reliable with high accuracy of voltage and current stabilization. The module is linked through CAN communication mode with the upper device. Current can be automatically well-distributed through software control. It is mainly suitable for charging lithium-ion batteries, lead-acid batteries and nickel hydrogen batteries. The module has high power density, few electromagnetic interference and small size, making it efficient and reliable.

Product Features

Wide AC input range: the module stands hard working conditions.

Multiple types: the module, small and light, can be adjusted into different voltage or power levels.

High efficiency: three-phase VIENNA rectifying technology enables the module to operate with a high efficiency of 94% even the input voltage and load varies in large range.

Current distribution is wholly controlled by software with strong capacity of resisting disturbance. More modules can be paralleled with each getting even current.

Fast charging speed: the machine adopts intelligent charging control algorithm which not only increases the charging efficiency but also extends the working life of the batteries.

Few pollution on power grid: the machine uses the advanced IGBT converter technology and active PFC technology, making the power factor higher than 0.997 and the THDi lower than 3%.

Strong card management function: charging transaction is processed with IC card. Fast pay on mobile phone, such as WeChat and online banking, can also be used. 

Safety: various protection functions help the machine effectively respond to emergencies. These functions include overheat protection, emergency stop, short-circuit protection, over-voltage/ over-current protection, AC input over/ under voltage protection and DC output voltage/current limiting.

Protection: the machine is moisture-proof, anti-mildew, salt-proof, fog-proof, anti-rust and anti-oxidation.


Technical Parameters

Product Specifications SZCD-Z10 SZCD-Z15 SZCD-Z20
Size (mm) 100×420×300 100×520×300 100×520×300
Input Voltage (V)
AC380±20%
Range of Output Voltage (V) DC200~700
Rated Output Current (A) 14.3 21.5 28.6
Uneven Current (%) ≤±5
Power Factor ≥0.995
Harmonic Content (%) ≤3
Voltage Deviation (%) ≤±0.5
Accuracy of Voltage Stabilization (%) ≤±0.5
Accuracy of Current Stabilization (%) ≤±1
Efficiency (%) 94
Communication Interface RS485 / CAN (Ethernet Interface can be added)
Safety Measures Over-voltage, Under-voltage, Over-current, Short Circuit, Over-heat and Leakage Protection  
Protection Level IP33
Operation Temperature (℃) -20~+50
Storage Temperature (℃) -30~+70
Relative Humidity (%) 5~ 95
Altitude (m) ≤2000; Special environmental conditions should be presented when making orders.